Disintegrator Machine

About Disintegrator Machine

Shri Krishna Disintegrator Machine is well designed hammer mills of simple and sturdy construction. They are ideally suited where coarse grinding of soft and medium hard minerals products is required. The main shaft is the only revolving parts, which require no adjustment. This main shaft runs on Ball/Roller bearings and it contains fix/swing type hammers. The fineness of the finished products is controlled by the replaceable screens fitted on the lower of the Disintegrator Machine body. The screens of desire mesh can be easily changed. All portions of the body where wear and abrasion is expected are lined with replaceable hard alloy liners. The screen is adjustable. The grinding (disintegration) is achieved by the impact of hammers against the liner fitted in the body; and the fine products passes through the screens of desired fineness.

Range of Sizes -

Shri Krishna' Disintegrator Machine is available in Eight Sizes of different production capacities and power consumption.

Beaters -

The beaters are of steel alloy forged and heat treated. Their tips are coated with hard alloy.

Screens -

There are two kinds of screens

• Steel Screens: having steel bars welded in steel frame for heavy work.
• Perforated steel Plate screens: held in M.S. iron frame suitable to fibrous materials and light work.

Selection of Machine -

It should be noted that for finer and of average heavy work, the medium Size Disintegrator Machine is more suitable. The larger sizes are more suitable for coarse grinding. It is better to install coarse screen and shift in rotary shifter afterwards (if necessary) to separate fine mesh powder. Extremely fine screens. If used, continuously, restrict the out - put, hence they should be avoided. The Disintegrator Machine are supplied & fitted with one set of hammers and one pair of screens fitted in the machine.

Disintegrator Machine Specification -